Drinking Raw Water Treatment Online pH Controller Monitoring

The treatment process for drinking water is very complex. First of all, raw water refers to water obtained directly from the water source without any treatment. These water sources include lakes, rivers, underground wells, etc. Raw water may contain various microorganisms, germs, harmful chemicals, etc., so it requires a series of treatments before it can become tap water that meets drinking water standards. pH value is an important indicator for measuring the acidity and alkalinity of water and has an important impact on the water treatment process. The level of pH value will affect the disinfection effect of chlorine and the progress of some chemical reactions, and will also have an impact on human health. The pH value of raw water for drinking water treatment needs to be measured. The APX1-C2 online Ph Orp Controller developed and produced by Daruifuno is designed to monitor the pH value of water quality.

Specification

Raw water for drinking water usually needs to be monitored for a variety of water quality parameters:
pH value: The pH value of drinking water should generally be between 6.5-8.5. Water in this range is most suitable for the human body. Therefore, an online Ph Controller is needed to continuously monitor the pH value of raw water. Only when the requirements are met can the next treatment step be entered.
Turbidity: Turbidity is an expression of the content of suspended solids in water, and its size directly affects the transparency of water.
Conductivity: Mainly used to determine whether there is salinity pollution in the water.
Hardness: mainly the content of calcium and magnesium ions. Excessive hardness will affect the taste of water and the service life of water equipment.

How to monitor the pH value of raw drinking water?
1. Install the equipment: First, you need to install the online pH controller. Connect the Ph Sensor to the controller and place the pH sensor into the water sample to be monitored.
2. Calibration equipment: After the equipment is installed, you need to calibrate the equipment to ensure accuracy. Our pH controller provides three-point calibration, and users can modify the calibration points according to their own standard solution values.
3. Run the device: After the device calibration is complete, you can start running the device to monitor the pH of the water. APX1-C2 is an online continuous monitoring analyzer that can monitor water quality 24 hours a day.
4. Data analysis: The PH ORP Controller has 2 channels of 4-20mA output and RS485 output. Users can choose one for data output according to their actual situation.
5. Maintain equipment: Clean and maintain the pH sensor regularly to ensure its long-term accurate operation.

Delfino has been focusing on the R&D and production of water quality analysis instruments for more than ten years. Our main products include Ph Orp Analyzer, Conductivity Analyzer, Turbidity Analyzer, Cod Analyzer, Dissolved Oxygen Analyzer, ammonium analyzer, chlorine analyzer, etc. If you are interested in our products, please contact us.