Multiparameter Controller
(Total 7 Products)
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:MCC200Transportation:Ocean,Land,Air,ExpressPackaging:Cardboard boxesSupply Ability:20pieces/monthThe MCC200 multi-parameter water quality meter is independently developed and produced by delfino, which can realize the monitoring of various parameters of water quality. In particular, the five parameters of surface water monitoring are... -
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:MCC200-A8Transportation:Ocean,Land,Air,ExpressPackaging:Cardboard boxesSupply Ability:30 pieces/monthThe latest multi-parameter water quality analyzer MCC200-A8 developed and produced by Daruifuno is upgraded to 8 channels on the basis of a four-channel multi-parameter controller. One controller can be connected with up to 8 digital sensors to... -
Min. Order:1 Piece/PiecesModel No:MCC200-A4Transportation:Ocean,Land,Air,ExpressSupply Ability:30 Pieces per MonthDaruifuno's MCC200-A4 multi-parameter water quality analyzer is designed for different industry needs. One controller can be connected with different digital sensors to realize simultaneous monitoring of different parameters and display them on one... -
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:MCC200-A4Transportation:Ocean,Land,Air,ExpressPackaging:Cardboard boxesSupply Ability:30 pieces/monthMulti-parameter analyzer MCC200-A4 supports connection with 2~4 digital sensors. Digital pH sensor, conductivity sensor, dissolved oxygen sensor, turbidity sensor and COD sensor, ammonia nitrogen sensors and residual chlorine sensor, etc. produced... -
Model No:MCC200Transportation:Ocean,Land,Air,ExpressSupply Ability:30 Pieces per MonthMCC200 is a universal water quality multi-parameter online monitoring controller, which can display the measured value and sensor status in real time, and can be connected to a variety of digital sensors developed and produced by delfino at the same... -
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:MCC200Transportation:Ocean,Land,Air,ExpressPackaging:Cardboard boxesSupply Ability:30pieces/monthParameters commonly measured in surface water monitoring include water temperature, pH, dissolved oxygen, conductivity, turbidity, chemical oxygen demand (COD), ammonia nitrogen, total phosphorus, total nitrogen, heavy metals, etc. The measurement... -
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:MCC100Transportation:Ocean,Land,AirPackaging:Cardboard boxesSupply Ability:30 Pieces per MonthDaruifuno brand MCC100 dual channel controller can connect 2 same or different digital sensors at the same time. Such as two dissolved oxygen or a COD sensor and an ammonia nitrogen sensor. Types of sensors include digital pH, ORP, conductivity,...
The multi-parameter controllers developed and produced by Daruifuno are designed to measure water quality parameters. Compared with single-parameter controllers, multi-parameter controllers can connect multiple sensors at the same time and display the readings of different sensors. The MCC200 multi-parameter Water Quality Controller supports connecting up to 8 digital sensors. At present, the parameters we support are: pH, ORP, dissolved oxygen, turbidity, conductivity, COD, ammonia nitrogen, residual chlorine, suspended solids, etc. You can connect sensors with the same or different parameters. The hardware of the multi-parameter controller itself is equipped with a cleaning relay. If you need current or relay, you can purchase our expansion module separately, which has 5 current and 5 relay outputs. The multi-parameter controller also has RS485 interface, supports modbus communication protocol, and can carry out data transmission. The power supply support AC 100~240V or DC 18~36V to choose.
Multiparameter Controller
A multiparameter controller is a device that is used to monitor and control multiple parameters in a process. These parameters can include temperature, pressure, flow rate, pH, conductivity, and other variables that affect the quality and efficiency of a process.Multiparameter controllers typically consist of a microprocessor-based control unit, sensors for measuring the various parameters, and actuators for controlling the process variables. The controller receives input signals from the sensors, processes the data, and generates output signals to the actuators to adjust the process variables as needed.Multiparameter controllers are commonly used in industrial processes such as chemical manufacturing, water treatment, and food processing. They help to ensure that the process operates within specified limits, optimizing efficiency and quality while minimizing waste and downtime.