PH ORP Controller
(Total 9 Products)-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX1-C1Transportation:ExpressPackaging:Cardboard boxesSupply Ability:200 pieces/monthpH refers to a measure of the acidity or alkalinity of a solution. It is used to measure the concentration of hydrogen ions in a solution. The pH scale ranges from 0 to 14, with 7 being neutral, below 7 being acidic, and above 7 being alkaline....
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX1-C1ZTransportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieces/monthpH is a measure of the acidity and alkalinity of water. For drinking water, the control of pH value is crucial to the quality and safety of water. A pH value that is too high or too low will have an impact on human health. If the pH value of...
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX1-C2Transportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieces/monthThe treatment process for drinking water is very complex. First of all, raw water refers to water obtained directly from the water source without any treatment. These water sources include lakes, rivers, underground wells, etc. Raw water may contain...
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX1-G2Transportation:ExpressPackaging:Cardboard boxesSupply Ability:500 pieces/monthIn order to prevent metal corrosion in the water vapor system in power plants, the pH value of water vapor must be strictly controlled. In the power plant's steam and water sampling system, boiler feed water system, condensate polishing system,...
-
Brand:DaruifunoMin. Order:1 Piece/PiecesModel No:APX2-C1Transportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieces/monthRO system is the abbreviation of reverse osmosis system. It is a phenomenon that creates an osmotic pressure difference between solutions with different solute concentrations through a semipermeable membrane, causing water molecules to permeate from...
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX2-C3Transportation:ExpressPackaging:cartonIndustrial wastewater and sewage testing is mainly a general term for the monitoring of wastewater, sewage and aquatic organisms discharged by enterprises and factories during the production process. According to the products and processing objects...
-
Brand:daruifunoModel No:APX1-C2Transportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieces/monthDuring the papermaking process, 99% of the water is removed from the pulp, exposing 1% of the paper material. Therefore, the process is very water-intensive. But the potential for gray water reuse is huge. Maximizing the use of wastewater (white...
-
Brand:DaruifunoMin. Order:1 Piece/PiecesModel No:APX1-C2Transportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieces/monthThe paper industry is a large user of water and one of the major industries that generates wastewater. Paper industry wastewater can be divided into two types: sulfate pulp wastewater and sulfite pulp wastewater. Among them, the wastewater...
-
Brand:daruifunoMin. Order:1 Piece/PiecesModel No:APX2-G4Transportation:ExpressPackaging:Cardboard boxesSupply Ability:100 pieceContinuously and accurately measuring and controlling the pH value of the water vapor system in power plants is one of the main means to control metal corrosion in the water vapor system. The difficulty of pH monitoring in power plants lies in the...
Ph orp controllers are widely used in thermal power, chemical fertilizer, metallurgy, environmental protection, pharmaceutical, biochemical, food and tap water industries. With a suitable Ph Sensor or orp sensor, the pH value or ORP value and temperature in the solution can be continuously monitored. Daruifuno's Ph Orp Controller has 2 channels of 0/4-20mA current output, supports signal remote transmission and long-term calibration, and also has a two-wire RS485 interface, which can be easily connected to the computer through the MODBUS-RTU protocol for monitoring and recording .
As an online Dosing Control Ph Meter, the control function is very important. Our controllers are equipped with 2 relays that can be set by SPST. Customers can set the opening value and closing value to realize the control of the acid-base dosing pump, temperature and cleaning control.
For the convenience of customers, the small-sized Ph Controller also adds a quick calibration button. The calibration of the PH ORP Controller is also very important. It is usually recommended that the electrode needs to be calibrated every 7 days. Our Ph Meter Transmitter supports pH three-point calibration , ORP two-point calibration, and the calibration point can be set by yourself.
In addition, we also have the Solution Ground Ph Meter, which can be connected with the SG sensors, used for power plant pure water.
Such a multifunctional pH ORP controller has a very favorable price. We have many models to meet different needs and save costs for customers.